wipos PS1 switched-mode power supply, nominal voltage: 24 V DC / 2,5 A (setting range 21,6-27,6 V DC), sustained short-circuit protection, input voltage range: 85-264 V AC / 90-350V DC, single phase, W x H x D: 32 × 90 × 110 mm
Commercial data
| Article number |
810.6520.0 |
| Article description |
Switched-mode power supply WIPOS PS1 2.5 |
| EAN |
4049088269646 |
| Order Unit |
1 piece(s) |
| Country of origin |
CN |
| Customs tariff number |
85044030 |
Dimensions
| Length packed |
115 mm |
| Width packed |
123 mm |
| Height packed |
57 mm |
| Gross weight packed |
290 g |
| Net weight single part |
252 g |
| Volume packed |
806.265 ccm |
| Certificates / Approvals |
 |
 |
General
| Connection type |
screw connection |
| Number of phases |
Single phase power supply |
| Modular version |
No |
| Mounting type, other |
No |
| Mounting type, wall mounting |
No |
| Rail mounting possible |
yes |
| Housing material |
Policarbonato |
| Operating temperature min. |
-40 °C |
| Operating temperature max. |
70 °C |
| relative humidity min. |
0 % |
| relative humidity max. |
95 % |
| Storage temperature / transport min. |
85 °C |
| Storage temperature / transport max. |
-40 °C |
| Degree of protection (IP) |
IP20 |
| Protection class |
I |
| Pollution degree |
2 |
| series Connection possible |
yes |
| Number of series switchable device |
2 |
| Parallel-service possible |
yes |
| Number of parallel switchable device |
2 |
Technical data
| Function display |
"DC OK" (LED green) (U(o) 17.6...19.4V) |
| two-Phase use |
85...264V AC A fuse or a protective Switch must be connected to the N-terminal |
| temperature coefficient |
±0.05%/K |
| ripple and noise |
< 0.05 V |
| hold time 115V AC |
> 25 ms |
| hold time 230V AC |
> 129 ms |
| isolating voltage Output DC |
4242 V |
| cohesive resistance (In-/Output) |
100 MOhm |
| Derating |
A. 60 °C ... 70 °C: 2,5 %/K B. 40 °C ... 70 °C: 1,67 %/K |
| cooling |
free convection |
| MTBF |
5900h |
| Connector cross section (input |
0,35-4 mm²/0,25-2,5mm² (AWG22 - 12/AWG22-14) |
| Connector cross section (output) |
0.5-4 mm²/0.5-2.5 mm² (AWG22 - 12/AWG22 - 14) |
| Connector cross section PE |
min. 2,5mm² (AWG14) |
| Wire strip length |
8 mm |
| Permissible torque min. |
0.5 Nm |
| Permissible torque max. |
0.6 Nm |
| Control "Adj" |
trimming potentiometer for fine-tuning of U(out) |
| Number of + |
2 |
| Number of - |
3 |
| Further terminals |
L1, N, PE |
Output
| Type of output voltage |
DC |
| Power output |
60 W |
| Output voltage stabilized |
yes |
| Output voltage |
24 V |
| Min. output voltage |
21.6 V |
| Max. output voltage |
27.6 V |
| Output current |
2.5 A |
Input
| Type of voltage (input voltage) |
|
| Input voltage DC min. |
90 V |
| Input voltage DC max. |
350 V |
| Input voltage AC min. |
85 V |
| Input voltage AC max. |
264 V |
| Rated frequency min. |
47 Hz |
| Rated frequency max. |
450 Hz |
| Input fuse |
6,3A / 250V (intern) |
Dimensions
| Depth |
110 mm |
| Width |
32 mm |
| Height |
90 mm |
| Mounting Distance horizontal |
20 mm |
| Mounting Distance vertical |
75 mm |
| Weight |
260 g |
Classification
| ECLASS 11 |
|
| ECLASS 8.1 |
27049002 |
| ETIM 7.0 |
EC002540 |
| ETIM 6.0 |
EC002540 |
| ETIM 5.0 |
EC002540 |
Product compliance
| REACH-SVHC conformity status |
Compliant |