Hoist Push Button Switch Schneider XACA881 6 Arah+On+Stop Single Speed

Harmony XAC

Pendant control station

XACA

Double insulated

Polypropylene

Control circuit

Complete ready for use

Control of single speed hoist motor

8 push-buttons

First push-button 1 NC + 1 NO raise, slow
Second push-button 1 NC + 1 NO lower, slow
Fourth push-button 1 NC + 1 NO left, slow
Third push-button 1 NC + 1 NO right, slow
Fifth push-button 1 NC + 1 NO forward slow
Sixth push-button 1 NC + 1 NO reverse, slow
Eighth push-button 1 NC + 1 NO O
Seventh push-button 1 NC + 1 NO I

ZB2BE102 + ZB2BE101 for each direction

With mechanical interlocking between pairs

Yellow

Screw clamp terminals, 1 x 0.5...1 x 2.5 mm�� without cable end
Screw clamp terminals, 1 x 0.5...2 x 1.5 mm�� with cable end

EN/IEC 60947-5-1
UL 508
CSA C22.2 No 14
EN/IEC 60204-32

GOST
CCC

TH

-25���70 ��C

-40���70 ��C

15 gn (f= 10���500 Hz) conforming to IEC 60068-2-6

100 gn conforming to IEC 60068-2-27

Class II conforming to IEC 61140

IP65 conforming to IEC 60529

IK08 conforming to EN 50102

1000000 cycles

Rubber sleeve with stepped entry 8���26 mm

A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A
A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A

10 A

600 V (pollution degree 3)

6 kV conforming to IEC 60947-1

Slow-break

25 MOhm

13 N push-button

10 A fuse protection by cartridge fuse type gG

40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C

(13-14)NO
(11-12)NC

(11-12)NC
(13-14)NO

1.045 kg