Roll over image to zoom in

Relay Schneider RUMC32P7 (11Pin) w/LED10A 220VAC

SchneiderSKU: 0014736

Share this product

Main
range of product	Harmony Relay
series name	Universal
product or component type	Plug-in relay
device short name	RUM
contacts type and composition	3 C/O
[Uc] control circuit voltage	230 V AC
[Ithe] conventional enclosed thermal current	10 A at -40…55 °C
status LED	With
control type	Lockable test button
utilisation coefficient	20 %

Complementary
shape of pin	Cylindrical
[Ui] rated insulation voltage	250 V conforming to IEC 300 V conforming to CSA 300 V conforming to UL
[Uimp] rated impulse withstand voltage	4 kV (1.2/50 µs)
contacts material	AgNi
[Ie] rated operational current	10 A at 277 V AC conforming to UL 10 A at 30 V DC conforming to UL 10 A at 277 V AC (same polarity) conforming to CSA 10 A at 30 V DC conforming to CSA 5 A at 250 V AC (NC) conforming to IEC 5 A at 28 V DC (NC) conforming to IEC 10 A at 250 V AC (NO) conforming to IEC 10 A at 28 V DC (NO) conforming to IEC
maximum switching voltage	250 V conforming to IEC
Resistive rated load	10 A at 250 V AC 10 A at 28 V DC
maximum switching capacity	2500 VA/280 W
minimum switching capacity	170 mW at 10 mA, 17 V
operating rate	<= 18000 cycles/hour no-load <= 1200 cycles/hour under load
mechanical durability	5000000 cycles
electrical durability	100000 cycles for resistive load
Average coil consumption in VA	3 at 60 Hz
drop-out voltage threshold	>= 0.15 Uc AC
Operate time	20 ms at nominal voltage
Release time	20 ms at nominal voltage
Average coil resistance	6800 Ohm at 20 °C +/- 15 %
rated operational voltage limits	184...253 V AC
protection category	RT I
test levels	Level A group mounting
safety reliability data	B10d = 100000
operating position	Any position
net weight	0.086 kg
device presentation	Complete product

Environment
dielectric strength	1500 V AC between contacts with micro disconnection 2500 V AC between coil and contact with reinforced 2000 V AC between poles with basic
product certifications	EAC CSA UL
standards	UL 508 EN/IEC 61810-1 CSA C22.2 No 14
ambient air temperature for storage	-40…85 °C
ambient air temperature for operation	-40…55 °C
vibration resistance	3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation 4 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating
IP degree of protection	IP40
shock resistance	10 gn (duration = 11 ms) for in operation conforming to EN/IEC 60068-2-27 10 gn (duration = 11 ms) for not operating conforming to EN/IEC 60068-2-27
pollution degree	2

Recover password