wipos switched-mode power supply, nominal voltage: 24 V DC / 1,25A (setting range 24-28 V DC), sustained short-circuit protection, input voltage range: 85-264 V AC / 90-375V DC, single phase, W x H x D: 40,5 × 88,5 × 115 mm
Commercial data
| Article number |
810.6110.0 |
| Article description |
Switched-mode power supply WIPOS P1 24-1.25 |
| EAN |
4049088037443 |
| Order Unit |
1 piece(s) |
| Country of origin |
TW |
| Customs tariff number |
85044082 |
Dimensions
| Length packed |
90 mm |
| Width packed |
40 mm |
| Height packed |
114 mm |
| Gross weight packed |
347 g |
| Net weight single part |
270 g |
| Volume packed |
410.4 ccm |
| Certificates / Approvals |
 |
 |
General
| Connection type |
screw connection |
| Number of phases |
Single phase power supply |
| Modular version |
No |
| Mounting type, other |
No |
| Mounting type, wall mounting |
No |
| Rail mounting possible |
yes |
| Housing material |
Policarbonato |
| Operating temperature min. |
-40 °C |
| Operating temperature max. |
71 °C |
| relative humidity min. |
20 % |
| relative humidity max. |
95 % |
| Storage temperature / transport min. |
85 °C |
| Storage temperature / transport max. |
-40 °C |
| Degree of protection (IP) |
IP20 |
| Parallel-service possible |
No |
Technical data
| permissible load |
min. 700 Ohm |
| Function display |
"DC OK" (LED green) (U(o) 17.6...19.4V) |
| Short-circuit protective device |
Strombegrenzung (fold forward) |
| temperature coefficient |
±0,03%/K |
| ripple and noise |
< 0.05 V |
| hold time 115V AC |
> 20 ms |
| hold time 230V AC |
> 30 ms |
| isolating voltage Output DC |
4242 V |
| cohesive resistance (In-/Output) |
100 MOhm |
| Derating |
61°C...71°C: 2,5 %/K |
| cooling |
free convection |
| MTBF |
5880h |
| Connector cross section (input |
min. 0.2mm² (AWG24)max.2.5mm² (AWG12) |
| Connector cross section (output) |
min. 0.2mm² (AWG24)max.2.5mm² (AWG12) |
| Connector cross section PE |
min. 2,5mm² (AWG14) |
| Wire strip length |
5 mm |
| Permissible torque max. |
0.6 Nm |
| CE-Norm |
EN55022 & EN61000-6-3, EN61000-3-2,EN61000-3-3, EN55024 & EN61000-6-2,EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8,EN61000-4-11, EN60204-1, EN61204-3 |
| TÜV/safety |
EN60950-1, EN61558-1, EN61558-2-16(erfüllt EN60204) , IRAM |
| Approval cULus |
UL 508 Listed, UL60950-1 RecognizedUL 1310 Class 2 Power supply |
| Number of + |
2 |
| Number of - |
2 |
| Further terminals |
L1, N, PE, OK (Switch output Open-Collector) |
| OK port Switch at U(out) |
< 19.2 V |
| OK port supply |
Con uscita in tensione 24Vcc |
Output
| Type of output voltage |
DC |
| Power output |
35 W |
| Output voltage stabilized |
yes |
| Output voltage |
24 V |
| Min. output voltage |
24 V |
| Max. output voltage |
28 V |
| Output current |
1.25 A |
Input
| Type of voltage (input voltage) |
|
| Power consumption |
< 42 VA |
| Input voltage DC min. |
90 V |
| Input voltage DC max. |
375 V |
| Input voltage AC min. |
85 V |
| Input voltage AC max. |
264 V |
| Rated frequency min. |
47 Hz |
| Rated frequency max. |
63 Hz |
| Input fuse |
T2A / 250V (intern) |
Dimensions
| Depth |
115 mm |
| Width |
40.5 mm |
| Height |
90 mm |
| Mounting Distance horizontal |
25 mm |
| Mounting Distance vertical |
25 mm |
| Weight |
290 g |
Classification
| ECLASS 11 |
|
| ECLASS 8.1 |
27049002 |
| ETIM 7.0 |
EC002540 |
| ETIM 6.0 |
EC002540 |
| ETIM 5.0 |
EC002540 |
Product compliance
| ROHS conformity status |
Compliant |
| REACH-SVHC conformity status |
Compliant |
